MDF surface is smooth and smooth, the material is fine and dense, the performance is stable, the edge is firm, and the decorative property of the board surface is good. But the moisture resistance of density board is poor. In contrast, the nail holding force of the density board is worse than that of the particleboard. If the screw is loose after tightening, it is difficult to fix it in the same position.

Main advantages

1. MDF is easy to finish. All kinds of coatings and paints can be evenly painted on the density board, which is the preferred substrate for paint effect.

2. Density board is a kind of beautiful decorative board.

3. All kinds of wood veneer, printing paper, PVC, adhesive paper film, melamine impregnated paper and light metal sheet can be used to finish the surface of density board.

4. After punching and drilling, the hard density board can also be made into sound-absorbing board, which can be used in architectural decoration engineering.

5. Excellent physical properties, uniform material, no dehydration problem.

Main disadvantages

1. The biggest drawback of density board is not moistureproof, see water to swell. When using density board as skirting board, door pocket board and window sill board, attention should be paid to painting on six sides, so as not to deform.

2. The expansion rate and deformation of density board in water is larger than that of homogeneous solid wood particle board for a long time.

Although the moisture resistance of the density board is poor, the surface of the density board is smooth and smooth, the material is fine and dense, the performance is stable, the edge is firm, and it is easy to shape, so as to avoid the problems of decay and insect damage. It is superior to Particleboard in bending strength and impact strength, and the decorative property of the board surface is excellent, especially better than the appearance of solid wood furniture.

3. The nail holding power of density board is poor. Because the fiber of density board is very broken, the nail holding force of density board is much worse than that of solid board and particleboard.

Main uses