Particle board, fire seal, fire door, melamine chipboard, hollow core--FULIN WOOD GROUP
Density:340~350kg/m3,The hollow door core enviromental protection Hollow particle board adopted high-quality imported logs as raw materials.It can be used for door cores ,furniture ,decorative,partition wall stuffing ,etc
Products
Hollow door core , door core, to make door bank
Introduction
Hollow core with environmental protection,Heat preservation,sound insulation,light in weight,Anti-impact,stable in dimensions and easy to processiong. Hollow door core use poplar or hardwood mixture
The hole diameter:21~28mm,the hoolow door core
Density:340~350kg/m3,The hollow door core enviromental protection Hollow particle board adopted high-quality imported logs as raw materials.It can be used for door cores ,furniture ,decorative,partition wall stuffing ,etc
Specification
SIZE:33*1180*2090MM,38MM*1180*2090MM
Density:350-400kg/m3,
Water absorption rate:6-13%
Modulus of Rupture:≥7Mpa
Internal bond strength:≥0.33Mpa
Formaldehyd:E1
APPLICANTION
Hollow door core is 0.35-0.55g/cm3, while that of the flat pressed door board is about 0.75g/cm3. It can be seen that the density of the mechanical board of the bridge opening is lower than that of the flat pressed particleboard. Therefore, the quality of the Hollow door core can be greatly reduced by using the mechanical panel of the bridge opening, and the maximum can be reduced by 60%; the thermal insulation and sound insulation performance of the mechanical panel of the bridge opening is good, and the 40 mm thick Hollow door core l is equivalent to 300 The insulation effect of mm thick brick wall is as high as 28dB; its compressive performance is good, and it will not deform when it is subjected to 2MPa pressure; because of the particularity of the manufacturing process of the mechanical slab of the bridge opening, Hollow door core water absorption expansion rate (TS) in the thickness direction is very small, almost comparable to the radial deformation of the wood.
FAQ
1) Which most thickness could u make?
We could make 30-44mm.
2) Which payment term could accept?
We accept 30% prepayment by TT and the balance against BL copy or LC at sight.
CONTACT
Heze Fulin Wood Products Co., Ltd.
Contract person:Frank Wang
E-mail:plywoodfrank@163.com
Tel:0086-530-6160717
Add:Zhuangzhai Town,Heze City, Shandong Province,China