The board used in decoration has very good toughness, which is very important. So how can we increase their toughness when we produce particleboard? Let's take a closer look at it below.

In fact, it is not difficult for particleboard manufacturers to increase the toughness during production. Generally, manufacturers use these two methods. One is to change the thickness of the particle board produced, and the other is to change the glue used in production. material.

During production, appropriately increasing the number of particle powder produced can significantly increase the toughness of the board. Another is the application of rubber materials during production. The rubber materials commonly used in production are generally There are two types, one is the harder sheet after drying and the other is the tougher sheet when dried during production.

Generally, the finished particle board does not need to be dried and can be used directly, but there will be anti-corrosion problems during use, let's take a look.

During production, the water content inside the board can be reduced. This is a good way to improve the performance of the board. If you want the board to have better anti-corrosion, you can apply preservatives on the surface of the board or its inside. Now speaking, chemical preservatives are not good for people, so it is better to use the method of controlling the water content, so that the board will be more environmentally friendly. If the problem of anti-corrosion of the particleboard furniture still exists, you can use the method of applying preservatives on the surface, if appropriate, do not use too much, and consider yourself. Do not place the processed plates in a relatively humid place, because the gas in the air will have a corrosive effect on the plates and also affect the quality of the plates.

When processing, pay attention to whether each process is completed correctly, which will greatly help the future use of particleboard.